Seraph AD2 MWX
  • 2 Analog I/O, balanced
  • 24 Bit AD, 32 Bit DA converter
  • Customized I/O Level up to +24 dBu
  • 1 AES/EBU I/O
  • switchable Input SRC with 140 dB dynamic range
  • “BEAST“ DSP powered
  • 24 Bit / 192 kHz sample resolution
  • Wordclock / Superclock Input
  • Multi-Card Support
  • TDM SyncBus
Technical Data
  • PCIe Audio Interface
  • 1 Lane (PCIe 1x) according PCI Express Base Specification 1.1
  • PCIe Busmaster DMA with Direct ASIO Support
  • 4 XLR for Analog I/O at D-Sub Adapter Cable
  • 2 XLR for AES/EBU I/O at D-Sub Adapter Cable
  • - 25°C … +60°C
  • +3,3V / 0,65A+12V /0,03A
Analog Outputs
  • Max. Level: customizable from +15dBu up to +24 dBu
  • Impedance: 75 Ohm
  • SNR: 123 dB(A)*
  • THD+N:
    <0,0008% / <-102 dB*
  • Frequency Response:
    0 Hz … 61 kHz
  • Crosstalk: <-110 dB*
Analog Inputs
  • Max. Level: customizable from +15dbu up to +24 dBu
  • Impedance: customizable 5 kOhm / 10 kOhm
  • SNR: 123 dB(A)*
  • THD+N:
    <0,00045 % = <-107 dB*
  • Frequency Response:
    5 Hz … 83,4 kHz
  • Crosstalk: <-110 dB
Analog I/O Remarks
  • Specifications marked with * refer to the +15 dBu version.
    Consult the user manual for specifications of the +24 dBu version.
  • Sample Rate Ratio:
    1:16 / 16 :1
  • Dynamic Range:
    144 dB(A)
  • THD+N: -140db
BNC Clock Input
  • Frequency Range:
    0 … 30 MHz
  • Impedance: 5 kOhm; software controlled termination to 75 Ohm
  • Sensitivity:
    1,5 Vss - 5,0 Vss
  • Features: DC-Offset free; Schmitt-triggered; Overvoltage Protection
BNC Clock Output
  • Frequency Range: 0 … 30 MHz
  • Internal Resistance: 13 Ohm
  • Output Voltage: 2,8 Vss at 75 Ohm
Midi Inputs
  • 2 x via DIN jacks at breakout cable
Midi Outputs
  • 2 x via DIN jacks at breakout cable
  • 6 kHz ... 192 kHz (Analog)
  • 22 kHz ... 192 kHz (AES/EBU)
  • 24 Bit physical
  • 32 Bit physical (DA)
  • 8...32 Bit variable towards Audio Application
Clock Sources
  • 1 Internal Clock
  • 1 Wordclock/Superclock Input
  • 1 AES/EBU Input
  • 1 TDM SyncBus Clock
"Beast" DSP
  • 44 Channel Mixer, Latency-Free
  • 52 Bit Mixing Engine
  • 32 Bit Single Channel Precision
  • 176 IIR-filter; full-parametric (Gain, F, Q), 4 per channel
  • 7 Mix Sums
  • Flexible Input Routing: any Signal to any Mixer Input
  • Flexible Recording Routing: any Mixer Channel to any Recording Channel in DAW
  • Flexible Output Routing: any Signal + any Sum to any Output
  • Remote controllable via MIDI with 2-Click Control Assignmen

  • interner Linkmore information
  • Windows™ 64 bit
    Windows™ XP/Vista/7/8/10
    Windows™ Server 2003/2008/2008.R2/2012
    WDM Audio, DirectSound, MME, ASIO 2.2, Advanced Multi-Client Support
  • Windows™ 32 bit
    Windows™ XP/Vista/7/8/10
    Windows™ Server 2003/2008
    WDM Audio, DirectSound, MME, ASIO 2.1, Advanced Multi-Client Support
  • Apple Mac OS X
    Core Audio
    Version 10.4 (Tiger)
    Version 10.5 (Leopard)
    Version 10.6 (Snow Leopard)
    Version 10.7 (Lion)

SERAPH AD2 MWX – Ambassador for Pure Audio

The ultimate meeting point for analog and digital audio signals has been created. Powered by the "BEAST", an unexceptional full-range DSP mixing desk, the SEARPH AD2 MWX offers 2 AES/EBU I/Os and 2 balanced analog I/Os, making it everything, but one-sited…

The ingenious circuit design with customizable input and output levels and only the best components available will give you an extraordinary sonic quality at any samplerate up to 192kHz. As one of the first interfaces ever, the SERAPH AD2 MWX features 32bit D/A converters, resulting in an unsurpassed quality, that finally reconciles the analog and digital domain.

Using the modern PCIe interface along with customized transfer functions, specifically designed and optimized for 32 bit high quality and high speed audio transfer, the SERAPH AD2 will be a reliable partner in any professional studio, that deals with highly sensitive analog and digital signals.

The new total recall AES/EBU digital mixer & patchbay!

BEAST Digital Signal Prozessor (DSP) As the member of the SERAPH series it features the new BEAST DSP, which will make additional mixing or monitoring hardware obsolete. Even a patchbay can be spared....

First of all, it includes a 64-2 channel mixer with one stereo aux and 3 more mono aux sums. These Aux sums are all pre/post assignable and can thus be used for headphone mixes or as effect sends. Furthermore every of the 64 channels provides an advanced filter section with

  • one low shelf EQ
  • two peak EQs
  • one high shelf EQ

Flexible and Expandable: The TDM SyncBus

Using the TDM SyncBus the SERAPH AD2 is a flexible basis for the realization of multichannel setups. Combinations with up to 3 more Seraphs or with any other SyncBus-compatible MARIAN sound system, allow setups with a number of channels according to your individual application or budget.
The SyncBus enables all connected systems to share audio clock and start/stop information. This unique feature ensures reliable recording of all the signals of the sound systems involved. More than that: Thanks to an intelligent bus management, TDM SyncBus compatible systems allow the transfer and exchange of up to 8 channels. The signals shared will appear in each mixer of each card. Even without another system the TDM SyncBus is a very useful tool, it allows putting EQs on a mixing sum or re-recording software application signals.

Fast and Reliable: Multi-client Driver Suite

Every SERAPH audio system provides support for Windows™ 7/Vista/Server 2008/XP/Server2003/2000 and Apple Mac OS X. The truly multi-client and continuously improved driver includes ASIO 2, GSIF 2, WDM with kernel streaming and real, non-emulated DirectSound support, delivering extrem low latencies for all software environments. Contrary to many competitive products, it allows to run several audio applications using the same or even different audio interfaces, parallel on the same computer system. Well-structured settings, dialogues and menus of the driver along with simple to read and practical documentation in printed form, make it easy to setup this system and adjust it to the specific requirements of your studio. Of course all settings, including MIDI assignments and signal flow of mixer and routing can be saved in a file for total recall.

Powerfull and Future-proof: A perfect choice

The SERAPH AD2 MWX is available in two versions. For basic integration the SERAPH AD2 with its Wordclock input connector will serve perfectly in all recording situations. The SERAPH AD2 MWX provides an additional daughter board featuring 2 MIDI in- and outputs as well as a wordclock synchronization output.

The MWX will be automatically recognized upon connection with the main card and does not require additional software installation. The advantages of it are obvious: you can e.g. use the 2 MIDI inputs right away for controlling the BEAST with your preferred MIDI controller.

The wordclock ports are ideal for advanced clock setups that allow independence of the clock signals coming in on the AES/EBU inputs. That means, you can also synchronize all external equipment featuring a wordclock input simply using the SERAPH AD2 MWX as clock master. Additionally the high quality samplerate converters on the audio inputs allow a unsurpassed flexibility in the clock setup of the digital studio. But of course the SRCs can of course be deactivated to retain a signal path, that is beyond any doubt – pure -.

A helpful tool to manage clock signals is the included software clock status panel, monitoring samplerates, lock status, samplerate converter status and possibly clock errors of all digital input signals.

Like every sound system by MARIAN the SERAPH AD2 marks up due to its easy installation and steadily controlled highest manufacturing quality. This and the fact, that the SERAPH AD2 is 100% engineered and assembled in Germany, make us confident enough to grant a full 5-year warranty.

More Information
Marian Technologies
German Website German Website News | Products | Downloads | Sales | Support | About Us | Imprint | Data Privacy Statement | Terms & Conditions